The cut above represents our 10-inch swing, Hand Lathe, with short legs mounted upon an iron table. This table serves as a receptacle for chips or oil, and is convenient for holding work or tools. The lathe is furnished with or without table as desired. Counter shaft and T rest, with two T's, accompany the lathe. Has 1/2 inch hole through Head Spindle. Length of bed, 4 feet; distance between centers, 30 inches.  Screw and Lever Feed on Tail Spindle.
       Speed of Countershaft 425 Revolutions per minute. Tight and loose pulleys 5 inch diameter, 2-1/4 inch face.